Questo sito o gli strumenti terzi da questo utilizzati si avvalgono di cookie necessari al funzionamento ed utili alle finalità illustrate nella cookie policy. Se vuoi saperne di più o negare il consenso a tutti o ad alcuni cookie, consulta la cookie policy.

Chiudendo questo banner, scorrendo questa pagina, cliccando su un link o proseguendo la navigazione in altra maniera, acconsenti all‘uso dei cookie.


Impianti e ricambi per il riscaldamento e il condizionamento di ambienti


To complete the system, Aerferrisi supplies a series of vents to be embed into a wall for the general air delivery, transit, and recovery in a treated environment.

MF vents are air delivery vents to be inserted in correspondence of the air delivery plafond or, in case of canalization, directly on the plafond itself. They are produced in white plastic, that can be painted over, and they have a manual calibration knob to modulate the air throw in each room.

MFE vents are the same as described above, and in addition they have a motorized control for the opening and closing of the vent that depends on a thermostat which can be set individually in each room.

R vents are used for the transit of air from the rooms treated with the general air recovery vent of the installed heating unit. They are generally mounted on the lower part of the door, but they can also be embed with the appropriate frame into the lower part of the room partition.

Diffusers are grilled panels produced with sheet metal in matching paint to the unit. They have to be applied directly to the machine by means of appropriate knobs, both on the air delivery side and the air recovery side. They come in various dimensions and can be applied in many situations where there is a need for transit grilles with a large section.

Aerferrisi srl   Via Vittime di Bologna, 14 - 10156 Torino - Tel. 011/2740283 Fax 011/2740284   P.I. 00501690010